| Sunday, 27 September 2020 |
|
     |
ShinyStat
serie MONOBLOCK® AISI 316L
 |
|
 |
|
MAIN STANDARD FEATURES: • CONSTRUCTION: AISI 316L. • STANDARDS: BS EN ISO 17292:2004. • CERTIFICATION: FIRE SAFE according to BS 6755 – API 6 FA – API 607. (Only PTFE + CRB) On request ANSI/API Std. 607 ISO 10497:2010 (Nace MR 0.175 on request) • CONNECTIONS: F/F Rp UNI ISO 7/1 (UNI EN 10226) DIN2999 parallel thread SW ANSI B16.11 socket weld BW ANSI B16.25 butt weld sch. 80 std. SW and BW PTFE CARBOGRAPHITE up to 4”. • PRESSURES: SERIES 800: PN64 1/4” - 4” PTFE SERIES 1500: PN100 1/4” - 2” PTFE PN 160/120/64: PN160 1/4” - 1” CARBOGRAPHITE PN120 1”1/4 - 2” CARBOGRAPHITE PN64 2”1/2 - 4” CARBOGRAPHITE SERIES 3000: PN210 1/4” - 4” DELRIN (max 70°C). • TEMPERATURE LIMITS: -20°C / +180°C - PTFE up to +200°C - PTFE+CARBOGRAPHITE (optimum from 60°C to 200°C). -20° / +70°C - DELRIN. • STEM: Anti blow out with anti-static device. • OPERATOR: lever. Available colours: black, red. GENERAL APPLICATIONS: ON-OFF valve for: high pressures and temperatures in industrial plants, chemical and petrochemical installations, water and pneumatic installations, steam up to 195°C. For special applications please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table. SPECIAL EXECUTIONS: • CONNECTIONS: F/F NPT ANSI B1.20.1. • DEGREASED VALVES: For oxygen service (max WP 20 bar). • Ball drilling. • Peek for high temperatures size up to +280°C (up to 2”). • Upon request, BW ANSI B16.25 butt weld sch40. • Locking device (open/close). • Oval handwheel up to 1". • For further special requests please consult our technical/commercial service. |
|
|
|
|
TOTAL
Measures: from 1/8" to 3"
Temperature limits:
for fluids from –20°C to + 130°C
Pressure limits:
for fluids from 100 bar to 40 bar
Application fields: The TOTAL series is extremely tough and is used where special performance is required, for example in the installations of gas and water distribution, industrial and civil heating, water plants at medium and high pressure, hydraulics and pneumatics, oil and petrochemical fields, non aggressive fluids, and vacuum (tested at 1•10-2 mbar).
• On request available in without Grease version.
Threaded end connections:
• Standard female and male according to UNI ISO 7/1 (UNI EN 10226).
• On request NPT and BSPT.
KOSMOS
Measures: from 1/8" to 3"
Temperature limits:
for fluids from –20°C to + 130°C
Pressure limits:
for fluids from 80 bar to 40 bar
Application fields:
The KOSMOS series is recommended in the installations of water distribution, industrial and civil heating, water plants at medium and high pressure, hydraulics and pneumatics, oil and petrochemical fields, non aggressive fluids.
Threaded end connections:
• Standard female and male according to UNI ISO 228/1.
MERCURY
Measures: from 1/4" to 4"
Temperature limits:
for fluids from –15°C to + 120°C
Pressure limits:
for fluids from 63 bar to 40 bar
Application fields:
The MERCURY series is frequently employed in the installations of water distribution, industrial and civil heating, hydraulics, pneumatics and agriculture.
Threaded end connections:
• Standard female and male according to UNI ISO 228/1.
GALAXY
Measures: from 1/4" to 4"
Temperature limits:
for fluids from –15°C to + 120°C
Pressure limits:
for fluids from 63 bar to 40 bar
Application fields:
The GALAXY series is mainly employed in the installations of water distribution, industrial and civil heating, hydraulics, oil, pneumatics and agriculture.
• On request available in without Grease version.
Threaded end connections:
• Standard female and male according to UNI ISO 7/1 (UNI EN 10226).
GALAXY LOCK
Measures: from 3/8" to 4"
Temperature limits:
for fluids from –15°C to + 120°C
Pressure limits:
for fluids from 63 bar to 40 barApplication fields: The GALAXY series is mainly employed in the installations of water distribution, industrial and civil heating, hydraulics, oil, pneumatics and agriculture.
Threaded end connections: • Standard female according to UNI ISO 7/1 (UNI EN 10226).
ASTER
Measures: from 1/4" to 4"
Temperature limits:
for fluids from –15°C to +90°C
Pressure limits:
for fluids of 40 barApplication fields: The ASTER series guarantees good performances in industrial and civil heating installations, water plants, hydraulics, pneumatics and agriculture.
Threaded end connections: • Standard female and male according to UNI ISO 228/1.
COMET
Measures: from 1/4" to 4"
Temperature limits:
for fluids from –15°C to +90°C Pressure limits:
for fluids of 40 barApplication fields: The COMET series is used where faultless sealing is required in the industrial and civil heating installations, water plants, hydraulics, pneumatics and agriculture.
Threaded end connections: • Standard female and male according to UNI ISO 7/1 (UNI EN 10226).
TRIFLUX
Measures: from 1/4" to 3"
Temperature limits:
for fluids from –15°C to +100°C Pressure limits:
for fluids from 40 bar to 16 barApplication fields: The TRIFLUX series, 3-way L and T-port ball versions, allows the flow to be diverted in all directions including delivery shut off, applicable to each of the three threaded ends. It is recommended for water distribution, industrial and civil heating, water plants at medium pressure, hydraulics and pneumatics, oil and petrochemical fields, non aggressive fluids. The TRIFLUX valve offers exceptional performances for ball and stem sealing in many applications.
Threaded end connections: • Standard female according to UNI ISO 7/1 (UNI EN 10226).
DELTA
Measures: from 1/4" to 2"
Temperature limits:
for fluids from –10°C to +100°C Pressure limits:
for fluids at maximum 10 barApplication fields: The DELTA series, 3-way full bore valve, allows only the diversion of the flow without shutting off the flow with the typical operation of a standard two-way valve. It is recommended for water distribution, industrial and civil heating, water plants, hydraulics and pneumatics, non aggressive fluids. It is used as a diverter valve.
Threaded end connections: • Standard female according to UNI ISO 7/1 (UNI EN 10226).
OLYMPIC
Measures: from DN20 to DN100
Temperature limits:
for fluids from –15°C to +120°C
Pressure limits:
for fluids at 16 bar for all the dimensionsApplication fields:
The OLYMPIC series is recommended when frequent interchangeability of components, e.g. for maintenance reasons may be required.
It is usually used for water distribution, industrial and civil heating, water plants at medium pressure, hydraulics and pneumatics, oil and petrochemical fields, non aggressive fluids.Threaded end connections:
• Standard flanges UNI EN 1092-3 (sealing raised face PN 16) overall length according to ISO 5752 (table 6 medium series PN 16).
ROLLY
Measures: from DN15 to DN80
Temperature limits:
for fluids from –20°C to +130°C
Pressure limits:
for fluids at 16 bar for all the dimensionsApplication fields:
The ROLLY series can be used as an alternative to OLYMPIC. It is usually employed for water distribution, industrial and civil heating, water plants, hydraulics and pneumatics, oil and petrochemical fields, non aggressive fluids.Threaded end connections:
• standard flanges according to UNI EN 1092-3 (sealing raised face PN 16).
MINIBALL
Measures: from 1/8" to 1/2"
Temperature limits:
for fluids from –10°C to +90°C
Pressure limits:
for fluids of maximum 10 bar (20°C)Application fields:
MINIBALL series is mainly employed in combination with water exposed pipes, sanitation plants, civil heating, compressed air, tank discharge.Threaded end connections:
• Standard female and male according to UNI ISO 228/1.
• On request female and male according to UNI ISO 7/1 (UNI EN 10226).
• On request compression connections.
MINIBALL AL
Measures: from 1/8" to 1/2"
Temperature limits:
for fluids from –10°C to +90°C
Pressure limits:
for fluids of maximum 10 bar (20°C)Application fields:
The MINIBALL series is mainly employed in combination with water exposed pipes, sanitation plants, civil heating, compressed air, tank discharge.Threaded end connections:
• Standard female and male according to UNI ISO 228/1.
• On request female and male according to UNI ISO 7/1 (UNI EN 10226).
INCAS K
Measures: from 1/2" to 1"
Temperature limits:
for fluids from –15°C to +90°C
Pressure limits:
for fluids of 80 barApplication fields:
The INCAS K series is suitable for wall embedding in water, heating and sanitation plants.Threaded end connections:
• Standard female according to UNI ISO 228/1.
INCAS M
Measures: from 1/2" to 1"
Temperature limits:
for fluids from –15°C to +90°C
Pressure limits:
for fluids of 63barApplication fields:
The INCAS M series is suitable for wall embedding in water, heating and sanitation plants.Threaded end connections:
• Standard female according to UNI ISO 228/1.
INCAS EXTRA
Measures: from 1/2" to 1"
Temperature limits:
for fluids from –15°C to +90°C
Pressure limits:
for fluids PN 16 (20°C)Application fields:
The INCAS EXTRA valve is suitable for heating and sanitation wall embedded installations.Threaded end connections:
• Standard female according to UNI ISO 7/1 (UNI EN 10226).
INCAS V
Measures: from 1/2" to 3/4"
Temperature limits:
for fluids from –10°C to +90°C
Pressure limits:
for fluids PN 10 (20°C)Application fields:
The INCAS VITON valve is suitable for heating and sanitary installations.Threaded end connections:
• Standard female according to a special UNI ISO 228/1.
INCAS V PRESS
Measures: Ø 16 x 2 Ø 16 x 2,25
Ø 20 x 2 Ø 20 x 2,25 Ø 20 x 2,5 Ø 26 x 3
Temperature limits:
for fluids from –10°C to +90°C
Pressure limits:
for fluids PN 10 (20°C)Application fields:
The INCAS V PRESS valve is suitable for heating and sanitation wall embedded installations. The particular truncated-conical shape guarantees a long lasting seal.
• For connections application fields, see the data sheet about the MP connectors.Connections for multilayer pipes:
• Tongs TH - H - U - F -B (Ø16 - Ø20)
• Tongs TH - H - F -B - C (Ø26)SPACE
Measures: from 1/2" to 1"1/4
Temperature limits:
for fluids from –15°C to +90°C
for gas from -15°C to + 60°C (FF)
Pressure limits:
for fluids 10 bar (20°C)
for gas: MOP5 (FF)Application fields:
The SPACE ball valve is recommended in heating installations and manifold sets.Sizes: 1/2” - 3/4” – 1”- 1” 1/4.
Threaded end connections:
• Standard female according to UNI ISO 228/1.
• Nut and tail (metallic seat + O-ring).COLLETTORE K
Measures: from 1/2" to 1"1/4
Temperature limits:
for fluids from –20°C to +110°C
Pressure limits:
for fluids 80 bar
Application fields:
The MANIFOLD K is recommended in heating installations for manifold sets.
Threaded end connections:
• Standard female according to UNI ISO 228/1.
• Tail and nut (metallic seal + O-ring).COLLETTORE M
Measures: from 1/2" to 2"
Temperature limits:
for fluids from –15°C to +110°C
Pressure limits:
for fluids from 63 bar to 40 bar
Application fields:
The MANIFOLD M is recommended in heating installations for manifold sets.
Threaded end connections:
• Standard female according to UNI ISO 228/1.
• Tail and nut (metallic seal + O-ring).
COLLETTORE A
Measures: from 1/2" to 1"
Temperature limits:
for fluids from –15°C to +90°C
Pressure limits:
for fluids 40 bar
Application fields:
The MANIFOLD A is recommended in heating installations for manifold sets.
Threaded end connections:
• Standard female according to UNI ISO 228/1.
• Tail and nut (metallic seal + O-ring).
COLLETTORE O
Measures: from 1/2" to 1"1/4
Temperature limits:
for fluids from –15°C to +90°C
Pressure limits:
for fluids from 25 bar
Application fields:
The MANIFOLD K is recommended in heating installations for manifold sets.
Threaded end connections:
• Standard female according to UNI ISO 228/1.
• Tail and nut (metallic seal + O-ring).
COLLETTORE SQUADRA
Measures: from 1/2" to 1"
Temperature limits:
for fluids from –15°C to +90°C
Pressure limits:
for fluids 40 bar
Application fields:
The MANIFOLD ANGLE is recommended in heating installations for manifold sets.
Threaded end connections:
• Standard according to UNI ISO 228/1.
• Tail and nut (metallic seal + O-ring).EXTENSION
Measures: from 1/2" to 2"
Temperature limits:
for fluids from –15°C to + 90°C
Pressure limits:
for fluids PN40
Application fields:
The EXTENSION ball valve has been designed for cooling and chilled water systems that need insulation.
The extension of the stem is fixed and does not rotate during operation, guaranteing perfect insulation.
Threaded end connections:
• Standard female and male according to UNI ISO 7/1 (UNI EN 10226).
EXTENSION L
Measures: from 1/2" to 2"
Temperature limits:
for fluids from –15°C to + 90°C
Pressure limits:
for fluids PN25
Application fields:
The EXTENSION L ball valve has been designed for cooling and chilled water systems that need insulation.
The extension of the stem is fixed and does not rotate during operation, guaraneing perfect insulation.
Threaded end connections:
• Standard female and male according to UNI ISO 228/1.
TAPPY
measures: from 1/2" x 3/4"
Temperature limits: for fluids from –15°C to + 90°C
Pressure limits: for fluids 40 bar
Application fields:
The TAPPY valve is designed particularly to be used as draining valve for boilers.
In the square cap version, the plug may be used as wrench for the handling of the cap.
Threaded end connections:
• standard female and male according to UNI ISO 228/1.HIPRESS
Measures: from 3/8" to 1"
Temperature limits:
for fluids from –10°C to +80°C
Pressure limits:
for fluids from 210 bar
Application fields:
The HIPRESS series is recommended for hydraulic installations, pneumatics and industrial plants in general, high pressure.
Threaded end connections:
• Standard female according to UNI ISO 7/1 (UNI EN 10226).
AIRY
Measures: from 1/4"to 2"
Temperature limits:
for air from 0°C to +60°C
Pressure limits:
for air to a maximum of 12 bar
Application fields:
The AIRY series is particularly used in compressed air installations.
Threaded end connections:
• Standard female according to UNI ISO 7/1 (UNI EN 10226).
AIRY LOCK
Measures: from 1/4" to 1"
Temperature limits:
for air from 0°C to +60°C
Pressure limits:
for air to a maximum of 12 bar
Application fields:
The AIRY LOCK series is particularly used in compressed air installations and where there is the need to operate with highest safe.
Threaded end connections:
• Standard female according to UNI ISO 7/1 (UNI EN 10226).
SONDA
Measures: from 3/4" to 1"
Temperature limits:
for fluids from –15°C to +90°C
Pressure limits:
for fluids of 40 bar (20°C)
Application fields:
The SONDA ball valve is used in central heating systems where it is necessary to have a temperature/pressure point. The valve is usually installed at the inlet and outlet of the system in order to determine the temperature difference (when connected to a heatmeter).
Threaded end connections:
• female according to UNI ISO 228/1.
TOTAL DVGW
Measures: from 3/8" to 2"
Temperature limits:
for fluids from –20°C to + 130°C
Pressure limits:
for fluids from 63 bar to 40 bar
CApplication fields:
The TOTAL DVGW series is used in water distribution plants.
Threaded end connections:
• Standard female according to UNI ISO 7/1 (UNI EN 10226).
GALAXY DVGW
Measures: from 3/8" to 2"
Temperature limits:
for fluids from –15°C to +120°C
Pressure limits:
for fluids from 50 bar to 40 bar
Application fields: The GALAXY DVGW series is mainly used in drinkable water distribution systems, industrial and civil heating, oil, pneumatics, agriculture.
Threaded end connections:
• Standard female and male according to UNI ISO 7/1 (UNI EN 10226). .
GALAXY KEY
Measures: from 1/2" to 1"
Temperature limits:
for fluids from –15°C to +120°C
Pressure limits:
for fluids from 50 bar to 40 bar
Application fields:
The GALAXY KEY is mainly used in drinkable water distribution systems, industrial and civil heating, oil, pneumatics, agriculture. Its system with locking key, allows to lock the valve only in closed position.
Threaded end connections:
• Standard female and male according to UNI ISO 7/1 (UNI EN 10226).
ASTER DVGW
Measures: from 1/4" to 2"
Temperature limits:
for fluids from –15°C to +110° C
Pressure limits:
for fluids from at 40 bar
Application fields:
The ASTER DVGW series is used in drinking water distribution, cooling and heating systems and pneumatic applications.
Threaded end connections:
• Standard female according to UNI ISO 228/1.
ASTER FLOW
Misure: da 1/2" a 3/4"
Limiti di temperatura:
per fluidi da +90°C
Limiti di pressione:
per fluidi PN 16
la valvola ASTER FLOW garantisce buone prestazioni negli impianti di riscaldamento e sanitari. Grazie alla valvola di ritegno maggiorata incorporata, offre caratteristiche di compattezza e allo stesso tempo alte prestazioni di portata. Estremità filettate: • di serie femmina a norme UNI ISO 228/1.
ASTER NF
Measures: from 1/4" to 2"
Temperature limits:
for fluids from –5°C to +90° C
with occasional peaks at 110°C max 1 hour
Pressure limits:
See diagram pression/temperature
Application fields:
The ASTER NF series is used in drinking water distribution plants, cooling and heating systems and pneumatic applications.
Threaded end connections:
Standard female according to UNI ISO 228/1.
ASTER ACS
Measures: from 1/4" to 4"
Temperature limits:
for fluids from –15°C to +110° C
Pressure limits:
for fluids from at 40 bar
Application fields: The ASTER ACS series is used in drinking water distribution, cooling and heating systems and pneumatic applications.
Threaded end connections:
• Standard female according to UNI ISO 228/1.ASTER ACS COUNTER
Measures: from 1/2" to 3/4"
Temperature limits:
for fluids from –15°C to +110°C
Pressure limits:
for fluids from 40 bar (20°C)
Application fields:
Stop valve for meters.
Threaded end connections:
• According to ISO 228/1.
ASTER ACS ANGLE COUNTER
Measures: from 1/2" to 3/4"
Temperature limits:
for fluids from –15°C to +110°C
Pressure limits:
for fluids from at PN40 (20°C)
Application fields:
Stop valve for meters.
Threaded end connections:
• According to ISO 228/1.ASTER ACS WITH DRAIN
Measures: from 1/2" to 2"
Temperature limits:
for fluids from –15°C to +90°C
Pressure limits:
for fluids from PN40
Application fields:
The ASTER ACS WITH DRAIN series is used in water distribution plants, cooling, heating and hydraulics systems.
Threaded end connections:
• Standard female according to UNI ISO 228.
PRESSTIGE
Measures: from 15 to 54 mm
Temperature limits:
for fluids from -15°C to +120°C
Pressure limits:
from PN40 to PN16
Application fields:
The PRESSTIGE series enables rapid installation due to the press-fit system using press tools. The valve incorporates the compression’s fitting, reducing the components to use and therefore the costs. This valve design incorporates a press-fit connection wich reduces the time and cost of installations. The valve complies with UNI EN 1057 and it is suitable for cold and hot water, drinking water distribution, industrial and civil heating installation.
HEXA
Measures: from 3/8" to 4"
Temperature limits:
for fluids from –5°C to +110°C
(in absence of steam)
Pressure limits:
See tech. datasheet
Minimal opening’s pressure: 0,02 bar
Application fields: It is ideal to be used in water systems (sanitary,industrial and agricultural), heating and thermic (radiators, boilers, pumps system). Mountable in all the positions: vertical,horizontal,oblique. Follow the fluid’s direction indicated with an arrow
Threaded end connections:
• Standard female according to UNI ISO 228/1.
SKY
Limiti di temperatura: per fluidi da -30°C a +120°C
SKY è un rubinetto a sfera dal design innovativo
Limiti di pressione: per fluidi PN 100
all’avanguardia, dotato del sistema antigelo e antigoccia
EDS (Doppia Guarnizione Elastica).
SILVER
Misure: da 1/2" a 3/4"
Limiti di temperatura:
per fluidi +90°C
Limiti di pressione:
per fluidi PN 10 (a 20°C) senza portagomma
Campi di utilizzo:
La serie NEW VIVA è utilizzata per la distribuzione di acqua calda e fredda.
Estremità filettate:
di serie maschio a norme ISO 228/1.
VIVA
Misure: da 1/2" a 3/4"
Limiti di temperatura:
per fluidi da -20°C a +90°C
Limiti di pressione:
per fluidi PN 40
Campi di utilizzo:
La serie VIVA è utilizzata per la distribuzione di acqua calda e fredda.
Estremità filettate:
di serie maschio a norme ISO 228/1.
ISIS
Measures: from 1/4" to 4"
Temperature limits:
for fluids from –15°C to +120°C
Pressure limits:
for fluids from PN25 to PN20 (DN 65-100)
(PN16 for art. 2415-2425)
Application fields: The ISIS ball valve is particularly suitable for those installations where aggressive water causes dezincification in standard brass alloys and weakens the material molecular structure of the material. Thanks to these features it is suitable for chilled water and sea water installations (recommended with Stainless steel lever K003) and can be installed on boats.
Threaded end connections:
• Standard female according to UNI ISO 7/1 (UNI EN 10226).
• Sccording to UNI ISO 228/1 on request.
• Copper pipe with compression brass olives.
ISIS FILTRO
Measures: from 1/2" to 1"
Temperature limits:
for fluids from –15°C to + 120°C
Pressure limits:
PN25 (20°C)
PN16 for Art. 2435V7
Application fields: The ISIS FILTRO ball valve is particularly suitable for those installations where high aggressive water causes dezincification in standard brass alloys and weakens the molecular structure of the material. As a result it is suitable for sea water and chilled water installations and can also be installed on boats.
Filter: Stainless Steel Mesh.
Cleaning: By removing the threaded plug, the Mesh can be removed and it is possible to remove the deposits of dirt plashed on the screen.
Maintenance: The Nut can be unscrewed to replace or clean the strainer Mesh.
Threaded end connections:
• Standard female according to UNI ISO 7/1 (UNI EN 10226).
• Copper pipe with compression brass olives.
GLADIUS
Measures: from 1/4" to 2"
Temperature limits:
for fluids from –15°C to + 110°C
Pressure limits:
PN25
Application fields: The GLADIUS strainer is particularly suitable for those installations where high aggressive water causes dezincification in standard brass alloys and weakens the molecular structure of the material. As a result it is suitable for sea water and chilled water installations and can also be installed on boats.
Filter: Stainless Steel Mesh 500 µm.
Cleaning:
• For art. 2341, unscrew the threaded plug, remove the Mesh and clean it.
• For art. 2342, open the purge valve to drain or remove the threaded plug to clean the filter.
serie COMET DZR
Dimensions: from 1/2" to 2"
Temperature limits:
for fluids from –15°C to + 90°C
Pressure limits:
for fluids 25 Bar
Application fields:
The COMET DZR ball valve is particularly suitable for those installations where high aggressive water causes decinzification in standard brass alloys and weakens the molecular structure of the material.
Threaded end connections:
• Standard female according to UNI ISO 7/1 (UNI EN 10226).
TOF COMET
Measures: from 3/4" to 1"
Temperature limits:
for fluids max 80°C
Pressure limits:
for fluids PN 16 (20°C)
Application fields: Fitting suitable PE pipe certified to AS4129:08, pipe PE 100 SDR11 PN16. The TOF COMET ball valve is particularly suitable for those installations where a reliable valve is required, in order to assure a high integrity seal on hydraulic,pneumatic and agricultural installations.
Threaded end connections:
• Standard female according to UNI ISO 7/1 (UNI EN 10226).
VENUS
Measures: from 1/4" to 4"
Temperature limits:
for gas from –20°C to +60°C
Pressure limits:
for gas MOP5 (20)
Application fields: The VENUS series is particularly recommended in gas installations families 1°, 2°, 3° (EN437).
• The VENUS valve complies to the Norm ATEX 94/9/CE concerning the protection of systems for use in potentially explosive athmospheres (group II category 2) ATEX marking is at customer’s request (please specify when ordering).
* On request the valve is available with ATEX certificate.
Threaded end connections:
• Standard female and male according to UNI ISO 7/1 (UNI ISO 10226).
VENUS TEST GAS
Measures: from 3/4" to 1"
Temperature limits:
for gas from –20°C to +60°C
Pressure limits:
for gas MOP5
Application fields: The VENUS series is particularly recommended in gas test installations (families 1°, 2°, 3° EN 437).
Art. 1031G...L and 1031G...XGL are equipped with locking key system wich allows to lock the valve only in closed position.
Threaded end connections:
• Standard female according to UNI ISO 7/1 (UNI ISO 10226).
VENUS GAS COUNTER
Measures: from 3/4" to 1"1/4
Temperature limits:
for gas from –20°C to +60°C
Pressure limits:
for gas MOP5 (20)
Application fields:
The VENUS GAS COUNTER series is particularly recommended in gas installations.
Threaded end connections:
• Standard female and turnable fitting female according to UNI ISO 7/1 (UNI ISO 10226).
• Nut female according to UNI ISO 228/1.VENUS KEY
Measures: from 1/2" to 1"
Temperature limits:
for fluids from –20°C to +60°C
Pressure limits:
for gas MOP5 (20)
Application fields: The VENUS KEY series is mainly used in gas installations. Its system with locking key, allows to lock the valve only in closed position.
Threaded end connections:
• Standard female and male according to UNI ISO 7/1 (UNI EN 10226).
VENUS FASTLOCK
Measures: from 1/2" to 1"1/2
Temperature limits:
for gas from –20°C to +60°C
Pressure limits:
for gas MOP5 (20)
Application fields The VENUS series is particularly recommended in gas installations (families 1°, 2°, 3° EN 437).
Threaded end connections:
• Standard female according to UNI ISO 7/1 (UNI ISO 10226).
VENUS FASTLOCK M
Misure: da 1/2" a 2"1/4
Temperature limits:
for gas from –20°C to +60°C
Pressure limits:
for Gas 500 mbar (0,5 bar)
Application fields:
The VENUS M/M series is particularly recommended in gas installations.
Threaded end connections:
• Standard male according to ISO 228.
VENUS WITH NUT
Measures: from 1/2" to 3/4"
Temperature limits:
for gas from –20°C to +60°C
Pressure limits:
for gas MOP5 (20)VENUS WITH UNI HOSE UNION
Measures:
from 3/8"x8 to 3/8"x13
from 1/2"x8 to 1/2"x13
Temperature limits:
for gas from –20°C to +60°C
Pressure limits:
for gas MOP5 (20)VENUS ANGLE
Measures: from 1/2" to 1"
Temperature limits:
for gas from –15°C to +60°C
Pressure limits:
for gas MOP5
Application fields: The VENUS angle series is particularly recommended in gas installations (families 1°, 2°, 3° EN 437).
Threaded end connections:
• Standard male and female according to UNI ISO 7/1 (UNI ISO 10226).
• Art. 1072G304 M/F with T-handle 1/2" x 1/2".
• Art. 1073G334 M/M with T-handle 1/2” x 1/2”.
VENUS ANGLE WITH NUT
Measures: from 1/2" to 3/4"
Temperature limits:
for gas from –15°C to +60°C
Pressure limits:
for gas MOP5VENUS ANGLE WITH UNI HOSE UNION
Measures: from 1/2" x 8 to 1/2" x 13
Temperature limits:
for gas from –15°C to +60°C
Pressure limits:
for gas MOP5MINERVA
Measures: from 1/2" to 2"
Temperature limits:
for gas from –20°C to +60°C
Pressure limits:
for gas MOP5 - GT1
Application fields:
The MINERVA gas series of valves is particularly recommended for installation after the gas meter to ensure a higher degree of safety and reliability.
Threaded end connections:
• Standard male and female according to UNI ISO 7/1 (UNI ISO 10226).
ATHENA
Measures: from 3/8" to 2"
Temperature limits:
for gas from –20°C to +60°C
Pressure limits:
for gas MOP5
Application fields:
The ATHENA series is particularly recommended in gas installations (families 1°, 2°, 3° EN 437).
Threaded end connections:
• Standard female according to UNI ISO 7/1 (UNI ISO 10226).PRESSTIGE GAS
Measures: from 15 to 54mm
Temperature:
for gas from -20°C to +60°C
Pressure limits:
for gas MOP5
Application fields:
The PRESSTIGE connection system enables speedy installation due to the press fit ends using V or M type tools, for sizes 15-18-22-28-35 mm. V type press tooling is used exclusively on 42-54 mm sizes.
The valve design incorporates a press-fit connection which reduces cost and time of installation. The valve complies with UNI EN 1057 and is suitable for installation on copper pipes type R250, thickness 1 and 1,5, and in gas installations (families 1°, 2°, 3° to EN 437). This valve is not suitable in installations which require high temperature resistance.
SATURN
Measures: from 1/2" to 2"
Temperature limits:
for gas from –20°C to +60°C
Pressure limits:
for gas MOP5
Application fields:
The SATURN series is particularly recommended in gas installations (families 1°, 2°, 3° EN 437).
Threaded end connections:
• Standard male-male (female for nut) according to ISO 228/1
SATURN BASETTA
Measures: from 1/2" to 3/4"
Temperature limits:
for gas from –20°C to +60°C
Pressure limits:
for gas MOP5
Application fields:
The SATURN series is particularly recommended in gas installations (families 1°, 2°, 3° EN 437).
Threaded end connections:
• Standard male-male (female for nut) according to ISO 228/1.
TOF-PE
PRESSURE AND TEMPERATURE LIMITS
Max. Temperature: from +5°C to +80°C
Max. Pressure: PN16 (20°C)
The max pressure is measured at ambient temperature.
This fitting allows the connection of high or low density polyethylene pipes.
The TOF joint system is very simple, easy and quick to install. It consists of only two elements: rubber truncated cone-shaped gasket and metal or plastic anchor ring. The rubber ring has a special configuration due to the polyethylene and production technology.
The truncated cone conforms to pipe tolerance (including ovality) and ensures a perfect hydraulic seal thanks to its proportional resistance, thus offering an important support to the mechanical sealing ring.
The special configuration of the mechanical sealing ring ensures a good adaptation to pipe tolerance and a perfect fastening to the pipe. For PE 100 pipes and gas pipes an internal reinforcing element (bushing) makes the pipe more rigid. The TOF PE joint with reinforced bushing is suitable for PE-X pipes.
TOF-PUSH
TOF-PE/OT
PRESSURE AND TEMPERATURE LIMITS
Max. Temperature: 80°C - Max. Pressure: PN16
The max pressure is measured at ambient temperature.
This fitting allows the connection of high or low density polyethylene pipes.
The TOF joint system is very simple, easy and quick to install. It consists of only two elements: rubber truncated cone-shaped gasket and metal or plastic anchor ring. The rubber ring has a special configuration due to the polyethylene and production technology.
The truncated cone conforms to pipe tolerance (including ovality) and ensures a perfect hydraulic seal thanks to its proportional resistance, thus offering an important support to the mechanical sealing ring.
The special configuration of the mechanical sealing ring ensures a good adaptation to pipe tolerance and a perfect fastening to the pipe. For PE 100 pipes and gas pipes an internal reinforcing element (bushing) makes the pipe more rigid. The TOF PE joint with reinforced bushing is suitable for PE-X pipes.
TOF PUSH/OT
TOF-PE/GAS/TOF PUSH/GAS
This fitting allows the connection of high density polyethylene pipes PE 80 and PE 100 for gas EN 1555/2 with valves, polyethylene pipes or other pipes for gas.
The TOF joint system is very simple, easy and quick to install. It consists of only three elements: a rubber truncated cone-shaped gasket, a plastic anchor ring and a reinforcement bushing to insert in the pipe (compulsory complying with UNI9736).
The truncated cone seal conforms to pipe tolerance (including ovality) and ensures a perfect seal thanks to its proportional resistance, thus offering an important support to the mechanical sealing ring.TOF PUSH/GAS
Misure: da 1/4" a 2"
Limiti di temperatura:
per aria da 0°C a +60°C
Limiti di pressione:
per aria fino a un massimo di 12 bar
Campi di utilizzo:
la serie AIRY viene utilizzata specificatamente per impianti ad aria compressa.
Estremità filettate:
di serie: femmina a norma UNI ISO 7/1 (UNI EN 10226).
TOF/C
Measures: from 3/4" to 3"
operating limits:
PN16, temperature 80°C, for drinking water.
application field:
For water distribution pipelines branch, pipe in water supply networks, used on polypropylene and PVC pipes, PN10 and 16.KRONOS
Measures: from 3/8" to 2"
Temperature limits:
for fluids from –20°C to +90°C
for gas from –20°C to +60°C
Pressure limits for fluids: (20°):
3/8”- 1” =PN50 – 1”1/4 – 1”1/2 =PN32 - 2” =PN25
for gas MOP5
Application fields:
The KRONOS fittings for iron pipe are used for repairs of civil water and gas plants renovation, industrial and civil heating, hydraulic plants.
Threaded end connections:
• Standard female and male according to UNI ISO 7/1
(UNI EN 10226).
TOF-FE
Measures: from 2"1/2 to 3"
Universal brass joint for rigid pipes in inches.
Configuration: MALE, DOUBLE JOINT FEMALE, DOUBLE JOINT FE-PE.
Standard threads according to ISO 228.
Use: connection of water iron pipes (up to 10bar);
• Connection of PVC pipes (external diameter in inches);
• Connection of copper pipe (external diameter in inches);
• Hydraulic stainless steel pipe (external diameter in inches);
• Standard rigid pipes in general, with external diameter in inches;
Limitation of use: max temperature 90°;
• Max pressure 10bar (with Iron pipe);
TOF MULTIPINZA
operating limits:
• Maximum operating temperature 120°C (-20°C + 120°C: please check pipe maximum temperatures and ensure that pipe and fluid are compatible)
• Maximum working pressure 10bar
application fields: Using reliable top quality materials, TOF Multipinza is employed in water distribution systems on drinking water applications.
It is also suitable for use on high and low temperature heating systems, air conditioning plants, fire protection systems and compressed air systems. Please check the compatibility of materials and fluids.
TOF LOCK
temperature limits:
min. +5°C - max +85°C.
Campi di utilizzo:
tight fittings for multilayer pipes (pex pipe kit available)
TOF LINK
Measures: from 1/2" to 2"
Yellow and chromium-plated brass threaded fittings
TOF COLD
Measures: from 1/4" to 3/4"
for copper pipes in refrigeration and air conditioning systems
TOF COPPER
temperature limits:
min. +5°C - max +85°C.for copper pipes in water installations (for gas with kit k10m).
ARTEMIS
Measures: from 1"1/2 to 12"
temperature limits with sealing seats in:
EPDM -20°C / +110°C for fluids
EPDM-HT -20°C / +130°C for fluids
NBR -20°C / +90°C for fluids
NBR -20°C / +60°C for gas
maximum working pressure:
PN16 DN40 - DN300 (for fluids)
PN16 DN40 - DN200 (for gas)
PN10 DN40 - DN300 (for gas)
THESIS
Measures: from 1"1/2 to 12"
temperature limits with sealing seats in:
EPDM -20°C / +110°C for fluids
EPDM-HT -20°C / +130°C for fluids
NBR -20°C / +90°C for fluids
NBR -20°C / +60°C for gas
maximum working pressure:
PN16 DN40 - DN150
PN10 DN200 - DN600.ATLANTIS
Measures: from 1"1/2 to 24"
temperature limits with sealing seats in:
EPDM -20°C / +110°C for fluids
NBR -20°C / +90°C for fluids
NBR -20°C / +60°C for gas
maximum working pressure:
PN16 DN40 - DN300 (for fluids)
PN16 DN40 - DN200 (for gas)
PN10 DN350 - DN600 (for fluids)
PN10 DN250 - DN600 (for gas)
ATLANTIS 40
Measures: from 1"!/2 to 24"
temperature limits with sealing seats in:
EPDM -20°C / +110°C for fluids
NBR -20°C / +90°C for fluids
NBR -20°C / +60°C for gas
VITON -10°C / +150°C for fluids
VITON -10°C / +60°C for gas.
maximum working pressure:
PN16 DN40 - DN300 (for fluids)
PN16 DN40 - DN200 (for gas)
PN10 DN350 - DN600 (for fluids)
PN10 DN250 - DN600 (for gas).POLARIS
Measures: from 1"1/2 to 24"
temperature limits with sealing seats in:
EPDM -20°C / +110°C for fluids
NBR -20°C / +90°C for fluids
NBR -20°C / +60°C for gas
maximum working pressure:
PN16 DN40 - DN150
PN10 DN200 - DN600.POLARIS 40
Measures: from 1"1/2 to 24"
temperature limits with sealing seats in:
EPDM -20°C / +110°C for fluids
NBR -20°C / +90°C for fluids
NBR -20°C / +60°C for gas
VITON -10°C / +150°C for fluids
VITON -10°C / +60°C for gas.
maximum working pressure:
PN16 DN40 - DN150
PN10 DN200 - DN600.
ALBA
Measures: from 1/4" to 3"
temperature limits:
-20°C / +150°C.
pressures:
100 bar - 40 bar.
general applications:
ON-OFF valve for: chemical products, for water and pneumatic installations, gas, water, vacuum. For steam applications, working pressures may be reduced and special seals required.
For special applications please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.
SUN WP
Measures: from 3/8" to 2"
temperature limits:
-20°C / +150°C.
pressures:
100 bar - 40 bar.
general applications:
ON-OFF valve for: chemical products, for water and pneumatic installations, gas, water, vacuum. For steam applications, working pressures may be reduced and special seals required.
For special applications please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.
MONOBLOCK AISI 316L
Measures: from 1/4" to 4"
general applications:
ON-OFF valve for: high pressures and temperatures in industrial plants, chemical and petrochemical installations, water and pneumatic installations, steam up to 195°C. For special applications please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.MONOBLOCK A105
Measures: from 1/4" to 4"
general applications:
ON-OFF valve for: high pressures and temperatures in industrial plants, refineries, water and pneumatic installations, steam up to 195°C.
For special applications please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.MONOBLOCK TI
Measures: from 1/4" to 2"
pressures:
SÉRIE 800 - 1500 (64 - 105 bar).
temperature limits:
A105: -10°C + 180°C (PTFE).
AISI316: -20°C + 180°C (PTFE).
general applications:
ON-OFF valve for: high pressures and temperatures in industrial plants, refineries, water and pneumatic installations, steam up to 180°C.
For special applications please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.
MONOBLOCK 6000
Mesures: from 1/4" to 1"
temperature limits:
A105: -10°C + 70°C.
AISI316: -20°C + 70°C.
pressures:
SERIE 6000:
PN420 1/4” - 1” DELRIN (max 70°C).
general applications:
ON-OFF valve for: high pressures and temperatures in industrial plants, refineries, hydraulic and pneumatic systems.
For special applications please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.TITAN
Measures: from 1/4" to 2"
temperature limits:
-20°C / +150°C (PTFE).
pressures:
PN140 1/4” - 1”
PN100 1”1/4 - 2”.
general applications:
ON-OFF valve for: chemical, water and pneumatic installations and for steam up to 10 bars. The valves are designed and manufactured in order to allow inspection and maintenance in line by removing the valve body only. For special applications please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.
ARGOS
Measures: from 1/4" to 2"
temperature limits:
-10°C / +150°C (PTFE).
pressures:
PN140 1/4” - 1”
PN100 1”1/4 - 2”.
general applications:
ON-OFF valve for: chemical, water and pneumatic installations and for steam up to 10 bars. The valves are designed and manufactured in order to allow inspections and maintenance in line by removing the valve body only. For special application please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.ARGOS FIRE SAFE
Measures: from 1/4" to 4"
temperature limits:
-10°C / +175°C (RPTFE).
pressures:
PN100 1/4” - 2”
PN63 2”1/2 - 4”.
general applications:
ON-OFF valve for: chemical and petrolchemical. The valves are certified FIRE SAFE and are designed and manufactured in order to allow inspection and maintenance in line removing the valve body only. For special application please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.
MOON stainless steel
Measures: from DN15 to DN100
PRESSURES:
PN16/40 DN15 - DN100 body from BAR
PN16 DN40 - DN100 body from CASTING.
TEMPERATURE LIMITS: -20°C / +180°C (PTFE).
GENERAL APPLICATIONS:
ON-OFF valve for: chemical products, food plants, distribution lines for gas, air, water. Suitable for average vacuum (see page 420), steam up to 200°C with PTFE+CARBOGRAPHITE SEATS.
MOON carbon steel
Measures: from DN15 to DN100
PRESSURES:
PN16/40 - DN15 - DN100 - (from bar) PN16 for DN50 and DN100 (from casting).
TEMPERATURE LIMITS:
-10°C / +180°C A105 (PTFE)
-20°C / +180°C LF2 (PTFE).
GENERAL APPLICATIONS:
ON-OFF valve for: chemical products, food plants, distribution lines for gas, air, water. Suitable for average vacuum (see page 420), steam up to 200°C with PTFE+CARBOGRAPHITE SEATS.MOON ansi
Measures:
ANSI 150 1/2" - 4"
ANSI 300 1/2" - 2".
PRESSURES:
ANSI 150 and ANSI 300.
TEMPERATURE LIMITS:
-20°C / 180°C AISI 316L (PTFE)
-10°C / +180°C A105 (PTFE).
GENERAL APPLICATIONS:
ON-OFF valve for: chemical products, food plants, distribution lines for gas, air, water. Suitable for average vacuum (see page 420), steam up to 200°C with PTFE+CARBOGRAPHITE SEATS.MOON OT58
Measures: from DN15 to DN50
PRESSURES: PN16.
TEMPERATURE LIMITS:
-20°C / +150°C for fluids
-20°C / + 60°C for gas.
GENERAL APPLICATIONS:
ON-OFF valve for: water plants, distribution lines for gas, air, water. For special application please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.MOON CR
Measures: from DN15 to DN100
GENERAL APPLICATIONS:
Applications: on-off valve where a steady temperature of the fluid is needed inside the valve by circulation of hot water, oil or other fluids inside the jacket mounted outside the valve body.
For special application please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.
SPECIAL EXECUTIONS:
Ball drilling.
HEATING JACKET: AISI304.
JACKET CONNECTIONS:
FF NPT ANSIB1.20.1
(taper threads).
For further special requests please consult our technical/commercial service.
MOON 3W
Measures: from DN15 to DN100
PRESSURES:
PN16/40 DN15 to DN50 - DN80
PN16 for DN65 and DN100.
TEMPERATURE LIMITS:
-20°C / +180°C 316L (PTFE)
-10°C / +180°C A105 (PTFE)
-20°C / +180°C LF2 (PTFE).
GENERAL APPLICATIONS:
ON-OFF valve for: deviation or mixing of fluids and gases in general installations. For special application please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.
SELENE stainless steel
Measures: from DN50 to DN200
PRESSURES:
PN16 or PN16/40 body from bar
PN16 body from casting.
TEMPERATURE LIMITS:
-20°C /180°C (PTFE).
GENERAL APPLICATIONS:
ON-OFF valve for: chemical products, food plants, distribution lines for gas, air, water. Suitable for average vacuum (see page 420), steam up to +200°C with PTFE+CARBOGRAPHITE.SELENE carbon steel
Measures: from DN50 to DN200
PRESSURES:
PN40 body from bar
PN16 body from casting or body from bar.
TEMPERATURE LIMITS:
-10°C / +180°C A105 (PTFE)
-20°C / +180°C LF2 (PTFE).
GENERAL APPLICATIONS:
ON-OFF valve for: chemical products, food plants, distribution lines for gas, air, water. Suitable for average vacuum (see page 420), steam up to +200°C with PTFE+CARBOGRAPHITE.ANTARES stainless steel
Measures: from DN15 to DN200
PRESSURES:
PN40 body from BAR
PN16 body from CASTING or body from BAR.
TEMPERATURE LIMITS:
-20°C / +180°C (PTFE).
GENERAL APPLICATIONS:
ON-OFF valve for: chemical products, petrochemical plants, water plants, distribution lines for gas, air, water. Suitable for average vacuum (see page 420), steam up to +200°C with PTFE+CARBOGRAPHITE. For special application please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.
ANTARES carbon steel
Measures: from DN15 to DN200
PRESSURES:
PN40 body from bar
PN16 body from casting or body from bar.
TEMPERATURE LIMITS:
-10°C / +180°C A105 (PTFE)
-20°C / +180°C LF2 (PTFE).
GENERAL APPLICATIONS:
ON-OFF valve for: chemical products, petrochemical plants, water plants, distribution lines for gas, air, water. Suitable for average vacuum (see page 420), steam up to +200°C with PTFE+CARBOGRAPHITE.ANTARES ansi
Measures: from 1/2" to 8"
PRESSURES:
ANSI 150 - ANSI 300
TEMPERATURE LIMITS:
-20°C / +180°C A316/A316L (PTFE)
-20°C / +180°C LF2 (PTFE)
-10°C / +180°C A105 (PTFE).
GENERAL APPLICATIONS:
ON-OFF valve for: chemical products, petrochemical plants, water plants, distribution lines for gas, air, water. Suitable for average vacuum (see page 420), steam up to +200°C with PTFE+CARBOGRAPHITE. For special application please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.TRISTAR
Measures: from 1/4" to 2"
MAIN STANDARD FEATURES:
• CONSTRUCTION: AISI 316L.
PRESSURES:
PN40 - PN25.
TEMPERATURE LIMITS:
-20°C / +160°C (PTFE).
GENERAL APPLICATIONS:
ON-OFF valve for: deviation or mixing of fluids in chemical installations, food, sanitary and water plants. All parts have to be adequately degreased if the valves have to be used with oxygen. For special application please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.
GEMINI
Measures: from 1/4" to 2"
PRESSURE:
PN64.
TEMPERATURE LIMITS:
-20°C / +160°C.
GENERAL APPLICATIONS:
ON-OFF valve for: deviation or mixing of fluids in general plants. For special application please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.MINIBINOX
Measures: from 1/8" to 1/2"
PRESSURE:
25 bar max
TEMPERATURE LIMITS:
-20°C / +150°C.
GENERAL APPLICATIONS:
ON-OFF valve for: industrial, sanitary plants, compressed air, instrumentation. For special application please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.TOTAL steelball
Measures: from 3/8" to 2"
PRESSURES:
100 bar - 80 bar for fluids and MOP5 for gas.
TEMPERATURE LIMITS:
-20°C / +130°C for fluids
-20°C / +60°C for gas.
GENERAL APPLICATIONS:
ON-OFF valve for: industrial plants in general, water, vacuum, gas distribution, industrial heating, partially corrosive fluids and for steam. For special application please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.
LYBRA
Measures: from 1/2" to 2"
PRESSURE:
40 bar.
TEMPERATURE LIMITS:
-20°C / +90°C.
GENERAL APPLICATIONS:
ON-OFF valve for: water and pneumatic plants, water, vacuum. For special application please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.VEGA
Measures: from 1/4" to 3"
PRESSURES:
PN140 1/4” - 1” (RPTFE)
PN100 1”1/4 - 2” (RPTFE)
PN64 2"1/2 - 3" (RPTFE)
TEMPERATURE LIMITS: -20°C / +150°C.
GENERAL APPLICATIONS:
ON-OFF valve with ISO 5211 mounting plate for direct assembly of actuator.
For special application please check the suitability of the valve for the process and the required corrosion resistancy using the relevant table.
ATLANTIS with pneumatic actuator
Measures: from 1"1/2 to 12"
ACTUATOR FEATURES:
ROTATION ANGLE: 90°.
TEMPERATURE: -20°C / +90°C.
MAXIMUM SUPPLY PRESSURE: 10 bar.
NOMINAL PRESSURE: 5.62 bar.
ADJUSTMENT: double register for opening and closing (DR).
SUPPLY FLUID: filtered compressed air.
LUBRICATION: NBR compatible oil to be used.
STANDARD VALVE FEATURES:
STANDARDS: BS EN 593 - (BS 5155) - MSS SP67 - API 609.
TEMPERATURE LIMITS (SEALS INSTALLED):
EPDM -20°C / +110°C
NBR -20°C / + 90°C.
MAXIMUM WORKING PRESSURE W/ACTUATOR:
Please refer to manual valve.POLARIS with pneumatic actuator
Measures: from 1"1/2 to 12"
ACTUATOR FEATURES:
ROTATION ANGLE: 90°.
TEMPERATURE: -20°C / +90°C.
MAXIMUM SUPPLY PRESSURE: 10 bar.
NOMINAL PRESSURE: 5.62 bar.
ADJUSTMENT: double register for opening and closing (DR).
SUPPLY FLUID: filtered compressed air.
LUBRICATION: NBR compatible oil to be used.
STANDARD VALVE FEATURES:
STANDARDS: BS EN 593 - (BS 5155) - MSS SP67 - API 609.
TEMPERATURE LIMITS WITH (SEALS INSTALLED):
EPDM -20°C / +110°C
NBR -20°C / + 90°C.
MAXIMUM WORKING PRESSURE W/ACTUATOR:
Please refer to manual valve.SUN WP with pneumatic actuator
Measures: from 3/8" to 2"
ACTUATOR FEATURES:
ROTATION ANGLE: 90°.
TEMPERATURE LIMITS: -20°C / +90°C.
MAXIMUM SUPPLY PRESSURE: 10 bar (8 bar for DNA045).
NOMINAL PRESSURE: 5.62 bar.
SUPPLY FLUID: filtered compressed air.
LUBRICATION: NBR compatible oil to be used.
STANDARD VALVE FEATURES:
TEMPERATURE LIMITS: –20°C / + 150°C (PTFE).
MAXIMUM WORKING PRESSURE: Please refer to manual valve.
CONNECTIONS:F/F Rp UNI ISO 7/1 (UNI EN 10226)
DIN2999 parallel
M/F (male R UNI ISO 7/1 (UNI EN 10226, female parallel).
MOUNTING PLATE: ISO 5211.
VEGA with pneumatic actuator
Measures: from 1/4" to 3"
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
–20°C / + 150°C (PTFE).
maximum working pressure:
1/4” - 1” PN140
1”1/4 - 2” PN100
2”1/2 - 3” PN64.TITAN with pneumatic actuator
Measures: from 1/4" to 2"
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
–20°C / + 150°C (PTFE)
use up to + 180°C (PTFE+CRB).
maximum working pressure:
PN140 1/4” - 1”
PN100 1”1/4 - 2”ARGOS with pneumatic actuator
Measures: from 1/4" to 2"
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
-10°C / +150°C (PTFE)
use up to + 180°C (PTFE+CRB)
maximum working pressure:
PN140 1/4" - 1"
PN100 1" 1/4 - 2".
MOON STAINLESS STEEL with pneumatic actuator
Measures: from DN15 to DN100"
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
-20°C / +180°C. (PTFE).
maximum working pressure: PN16.MOON CARBON STEEL with pneumatic actuator
Measures: from DN15 to DN100"
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
–20°C + 180°C LF2 (PTFE)
–10°C + 180°C A105 (PTFE).
maximum working pressure: PN16.MOON 3W with pneumatic actuator
Measures: from DN15 to DN100"
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
–20°C / + 180°C 316/316L (PTFE)
–10°C / + 180°C A105 (PTFE)
–20°C / + 180°C LF2 (PTFE).
maximum working pressure: PN16.MOON OT58 with pneumatic actuator
Measures: from DN15 to DN50
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
–20°C / + 150°C for fluids
–20°C / + 60°C for gas.
maximum working pressure: PN16.SELENE STAINLESS STEEL with pneumatic actuator
Measures: from DN50 to DN200
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
-20°C / +180°C. (PTFE).
maximum working pressure:
PN16 (PN25 and 40 upon request).SELENE CARBON STEEL with pneumatic actuator
Measures: from DN50 to DN200
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
–20°C / + 180°C LF2 (PTFE)
–10°C / + 180°C A105 (PTFE).
maximum working pressure:
PN16 (PN25 and 40 upon request).ANTARES STAINLESS STEEL with pneumatic actuator
Measures: from DN15 to DN200
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
-20°C / +180°C. (PTFE).
maximum working pressure:
PN16 (PN25 and 40 upon request).ANTARES CARBON STEEL with pneumatic actuator
Measures: from DN15 to DN200
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
-20°C / + 180°C LF2 (PTFE)
-10°C / + 180°C A105 (PTFE).
maximum working pressure:
PN16 (PN25 and 40 upon request).GEMINI with pneumatic actuator
Measures: from 1/4" to 2"
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
–20°C / + 160°C (PTFE).
maximum working pressure: 64 bar.OLYMPIC with pneumatic actuator
Measures: from DN20 to DN100
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
–15°C / + 120°C (PTFE).
maximum working pressure:
PN16 for all dimensions.TRIFLUX with pneumatic actuator
Measures: from 1/2" to 2"
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
for fluids –15°C / + 100°C (PTFE).
maximum working pressure:
for fluids 40 bar – 16 bar.DELTA with pneumatic actuator
Measures: from 3/8" to 2"
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
for fluids –15°C / + 100°C (PTFE).
maximum working pressure:
for fluids up to 10 bar.TOTAL with pneumatic actuator
Measures: from 3/8" to 3"
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
for fluids –20°C + 130°C (PTFE)
for gas –20°C + 60°C (PTFE).
maximum working pressure:
from 64 bar to 20 bar for fluids.LYBRA with pneumatic actuator
Measures: from 1/2" to 2"
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
–20°C + 90°C (PTFE).
maximum working pressure: PN40.HYPRESS with pneumatic actuator
Measures: from 3/8" to 1"
ACTUATOR FEATURES:
temperature limits: -20°C / +90°C.
maximum supply pressure:
10 bar (8 bar for DNA045).
nominal pressure: 5.62 bar.
STANDARD VALVE FEATURES:
temperature limits:
for fluids –20°C / + 80°C (DERLIN).
maximum working pressure:
for fluids up to 210 bar.
ATLANTIS/ATLANTIS40 with electric actuator
Measures: from 1"1/2 to 16"
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.
EQ ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +80°C.
• SUPPLY VOLTAGE: 24 VAC, 230 VAC, 400 V3N.
• PROTECTION DEGREE: IP67.
• STATIC TORQUE SUPPLIED: 500 N/m - 1000 N/m.
• ROTATION TIME: 29 - 43 - 93 s.POLARIS/POLARIS40 with electric actuator
Measures: from 1"1/2 to 16"
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.
EQ ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +80°C.
• SUPPLY VOLTAGE: 24 VAC, 230 VAC, 400 V3N.
• PROTECTION DEGREE: IP67.
• STATIC TORQUE SUPPLIED: 500 N/m - 1000 N/m.
• ROTATION TIME: 29 - 43 - 93 s.SUN WP with electric actuator
Measures: from 3/8" to 2"
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.
STANDARD VALVE FEATURES:
• TEMPERATURE LIMITS: -20°C / +150°C (PTFE).
• MAXIMUM WORKING PRESSURE: 160 bar - 40 bar.
• CONNECTIONS:
F/F Rp UNI ISO 7/1 (UNI EN 10226) DIN2999 parallel
M/F (male R UNI EN 10226, female parallel).
• MOUNTING BASE: ISO 5211.VEGA with electric actuator
Measures: from 1/4" to 3"
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.
STANDARD VALVE FEATURES:
• TEMPERATURE LIMITS: -20°C / +150°C (PTFE).
• MAXIMUM WORKING PRESSURE:
1/4” - 1” PN140
1”1/4 - 2” PN100
2”1/2 - 3” PN64.
• THREADED END CONNECTIONS:
F/F Rp UNI ISO 7/1 (UNI EN 10226).
• MOUNTING PLATE: ISO 5211.TITAN with electric actuator
Measures: from 1/4" to 2"
CEL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.
STANDARD VALVE FEATURES:
• TEMPERATURE LIMITS:
-20°C / +150°C (PTFE)
to be used use up to +180°C (PTFE + CRB).
• MAXIMUM WORKING PRESSURE:
1/4” - 1” PN140
1” 1/4 - 2” PN100.
• CONNECTIONS:
F/F Rp F/F Rp UNI ISO 7/1 (UNI EN 10226)
DIN2999 parallel GAS
F/F NPT
SW ANSI B16.11 socket weld
BW ANSI B16.25 butt weld sch40.ARGOS with electric actuator
Measures: from 1/4" to 2"
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.
STANDARD VALVE FEATURES:
• TEMPERATURE LIMITS:
-10°C / +150°C (PTFE)
to be used use up to +180°C (PTFE + CRB).
• MAXIMUM WORKING PRESSURE:
1/4” - 1” PN140
1” 1/4 - 2” PN100.
• CONNECTIONS:
F/F Rp F/F Rp UNI ISO 7/1 (UNI EN 10226)
DIN2999 parallel GAS
F/F NPT
SW ANSI B16.11 socket weld
BW ANSI B16.25 butt weld sch40.MOON STAINLESS STEEL with electric actuator
Measures: from DIN15 to DIN100
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.
STANDARD VALVE FEATURES:
• STANDARDS: BS EN ISO 17292 : 2004,
Fire Safe BS 6755 – API 6 FA – API 607.
• TEMPERATURE LIMITS -20°C / +180°C (PTFE).
• MAXIMUM WORKING PRESSURE:
PN16 (PN25 and 40 upon request).
• CONNECTIONS WITH FLANGES:
UNI EN 1092 and DIN 2501 BL.1.
• FLANGE DRILLING: metric.MOON CARBON STEEL with electric actuator
Measures: from DN15 to DN100
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.STANDARD VALVE FEATURES:
• STANDARDS: BS EN ISO 17292 : 2004,
Fire Safe BS 6755 – API 6 FA – API 607.
• TEMPERATURE LIMITS:
–20°C +180°C LF2 (PTFE)
–10°C +180°C A105 (PTFE).
• MAXIMUM WORKING PRESSURE:
PN16 (PN25 et 40 upon request).
• CONNECTIONS WITH FLANGES:
UNI EN 1092 and DIN 2501 BL.1.
• FLANGE DRILLING: metric.MOON 3W with electric actuator
Measures: from DN15 to DN100
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.STANDARD VALVE FEATURES:
• STANDARDS: BS EN ISO 17292 : 2004,
Fire Safe BS 6755 – API 6 FA – API 607.
• TEMPERATURE LIMITS: –20°C +180°C 316/316L (PTFE)
–10°C +180°C A105 (PTFE) / –20°C +180°C LF2 (PTFE).
• MAXIMUM WORKING PRESSURE: PN16.
• CONNECTIONS WITH FLANGES:
UNI EN 1092 and DIN 2501 BL.1.
• FLANGE DRILLING: metric.
• SPECIAL EXECUTIONS: PN40 – ANSI 150 – ANSI 300.SELENE STAINLESS STEEL with electric actuator
Measures: from DN50 to DN200
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.
EQ ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +80°C.
• SUPPLY VOLTAGE: 24 VAC, 230 VAC, 400 V3N.
• PROTECTION DEGREE: IP67.
• STATIC TORQUE SUPPLIED: 500 N/m – 1000 N/m.
• ROTATION TIME: 29 s – 43 s – 93 s.SELENE CARBON STEEL with electric actuator
Measures: from DN50 da DN200
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.
EQ ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +80°C.
• SUPPLY VOLTAGE: 24 VAC, 230 VAC, 400 V3N.
• PROTECTION DEGREE: IP67.
• STATIC TORQUE SUPPLIED: 500 N/m – 1000 N/m.
• ROTATION TIME: 29 s – 43 s – 93 s.ANTARES STAINLESS STEEL with electric actuator
Measures: from DN15 to DN200
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.EQ ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +80°C.
• SUPPLY VOLTAGE: 24 VAC, 230 VAC, 400 V3N.
• PROTECTION DEGREE: IP67.
• STATIC TORQUE SUPPLIED: 500 N/m – 1000 N/m.
• ROTATION TIME: 29 s – 43 s – 93 s.ANTARES CARBON STEEL with electric actuator
Measures: from DN15 to DN200
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.
EQ ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +80°C.
• SUPPLY VOLTAGE: 24 VAC, 230 VAC, 400 V3N.
• PROTECTION DEGREE: IP67.
• STATIC TORQUE SUPPLIED: 500 N/m – 1000 N/m.
• ROTATION TIME: 29 s – 43 s – 93 s.GEMINI with electric actuator
Measures: from 1/4" to 2"
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.
STANDARD VALVE FEATURES:
• TEMPERATURE LIMITS: –20°C + 160°C (PTFE).
• MAX WORKING PRESSURE: 64 bar.
• STEM: Anti blow out 1/4”- 2”.
• MOUNTING PLATE: ISO 5211.TRIFLUX with electric actuator
Measures: from 1/2" to 2"
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.
STANDARD VALVE FEATURES:
• TEMPERATURE LIMITS: for fluids –15°C + 100°C (PTFE).
• MAX WORKING PRESSURE: for fluids 40 bar – 16 bar.
• THREADED CONNECTIONS:
F/F/F Rp UNI ISO 7/1 (UNI EN 10226).
• STEM: double conical sealing by 4 gaskets.TOTAL with electric actuator
Measures: from 3/8" to 3"
EL-EH ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -20°C / +70°C.
• SUPPLY VOLTAGE: 012 - 240V.
• PROTECTION DEGREE: IP65.
• STATIC TORQUE SUPPLIED: 20 N/m - 350 N/m.
• ROTATION TIME: 11 s. - 60 s.STANDARD VALVE FEATURES:
• TEMPERATURE LIMITS:
for fluids –20°C + 130°C (PTFE)
for gas –20°C + 60°C (PTFE).
• MAX WORKING PRESSURE:
from 64 bar to 20 bar for fluids
MOP5 for gas.
• STEM: double conical sealing by 4 gaskets.LYBRA with electric actuator
Measures: from 1/2" to 2"
EM080-EMM80 ACTUATOR FEATURES:
• ROTATION ANGLE: 90°.
• TEMPERATURE LIMITS: -5°C / +70°C.
• SUPPLY VOLTAGE: 024 Vac and 230Vac.
• PROTECTION DEGREE: IP54.
• RELEASE WITH MANUAL OPERATION OPTION:
1/2" - 1"1/4.
• STATIC TORQUE SUPPLIED: 4.5 N/m - 14 N/m.
• ROTATION TIME: 15 s. - 60 s.STANDARD VALVE FEATURES:
• TEMPERATURE LIMITS: -20°C / +90°C (PTFE).
• MAX WORKING PRESSURE: PN40.
• THREADED ENDS:
F/F Rp UNI UNI ISO 7/1 (UNI EN 10226)
DIN2999 parallel.
• MOUNTING PLATE: ISO 5211.ELECTRIC ACT. EM SERIES
GENERAL APPLICATIONS:
The actuator is suitable for hydraulic plants in general, heating and air-conditioning plants with 2/3-way ball valves.OPERATION: The actuator is preset for an ON-OFF type control. The actuator has two stop positions controlled by two mechanical OPEN – CLOSE limit switches and no possibility for intermediate positions.
ELECTRIC ACT. EL-EH SERIES
GENERAL APPLICATIONS:
The actuator is suitable for industrial and heating plants; it can be used with 2/3-way ball valves and butterfly valves.OPERATION: The actuator is preset for an ON-OFF type control. The actuator has two stop positions controlled by two electro-mechanical limit switches with two other electro-mechanical limit switches for the valve open-valve close signal. They also offer the possibility to use the valve for proportional control by selecting intermediate positions which are given by the input signal (optional: positioning data sheet dps2005).
ER-EQ SERIES ELECTRIC ACT.
GENERAL APPLICATIONS: The actuator is suitable for industrial and heating plants; it can be used with 2/3-way ball valves and butterfly valves.
OPERATION: ER-EQ actuators are designed to electrically control 90° angular travel valves. ER-EQ actuators have a mechanical interface for valve connection in compliance with ISO 5211.
The 90° travel can be mechanically adjusted by means of two end-of-stroke screws with ± 5° tolerance.
The angular travel is limited in both directions by two adjustable electric switches that cut the power supply or the control circuit when the set travel is reached.
The hand-wheel helps easy operation of the valve in emergency situations.
The hand-wheel does not turn when the motor is started but is always ready for use.
The electric connection is made on a terminal block inside the actuator.ELECTRIC ACT. AS SERIES
GENERAL APPLICATIONS: The actuator is suitable for industrial plants; it can be used with large diameter 2 and 3 way ball valves and butterfly valves.
OPERATION: angular actuators are modular actuators. They are operated by an electric motor equipped with a hand-wheel for manual control. The travel is limited by end switches acting in both directions or during CLOSING by means of a torque limiter.
 Via Giuseppe Verdi, 68 - 25073 Bovezzo (Bs) - Tel. +39 030 21101 - Fax +39 030 2110301 (Italia) - P. Iva 03370780177 - Email: This email address is being protected from spambots. You need JavaScript enabled to view it. |
A cookie is a small piece of text sent to your browser by a website you visit. It helps the website to remember information about your visit, like your preferred language and other settings. That can make your next visit easier and the site more useful to you. Cookies play an important role. Without them, using the web would be a much more frustrating experience.
We use cookies for many purposes. We use them, for example, to remember your safe search preferences, to make the ads you see more relevant to you, to count how many visitors we receive to a page, to help you sign up for our services and to protect your data.